As a group of building and manufacturing experts we thoroughly research and prepare our materials. We may receive commissions when you purchase products based on our link recommendations.

Best Nails for Hardie Siding And What Makes Them So Good

Fiber cement panels were the main substitute for Hardie sidings at the turn of the twentieth century. Surprisingly, they were given the name “Eternit.” It is derived from the Latin word “aeternitas,” meaning “forever.” We, however, still utilize the material in modern siding boards due to its non-combustible characteristic, whether it is everlasting or not.

Best Nails for Hardie Siding
Source: Pixabay.com

We’ve learned enough history. It’s time to look for the greatest Hardie siding nails. This article has highlighted a few of the best nails for Hardie siding. We also efficiently described these nails and enumerated some of the pros and cons of using them.

What Are the Best Nails for Hardie Siding?

We talked to Sam Wells from from Materials Market, marketplace for building materials a he  walked through some of the top nail types for Hardie siding. Let’s take a look at his picks:

Bostitch C5R90BDSS 1-3/4-in 15 Degree Stainless Steel Coil Siding Nails (3,600 pk)

Bostitch C5R90BDSS 1-3/4-in 15 Degree Stainless Steel Coil Siding Nails (3,600 pk)
Source: Amazon.com

The superb stainless-steel construction distinguishes the Bostitch C5R90BDSS from its competitors. Bostitch has chosen type 304 stainless steel, which provides the best corrosion resistance. The material also complies with ASTM F1667 standards. So, don’t worry about the quality.

Aside from that, a wire weld is included with this kit. It makes using nailers easier, but it also allows for rough nailing. Furthermore, wire collated nails are more resistant to cold and humidity than those with plastic strips.

These nails offer above-average gripping power in addition to being durable. This is because a large amount of its surface is covered in raised rings that provide additional grip. Furthermore, the grip becomes even firmer thanks to their flat round heads. As a result, you won’t have to be concerned about the siding boards reversing.

The nails are a little blunt, which is worth mentioning. It takes more effort to drive in such edges, which may also harm siding boards. Sharper edges would be much more convenient as these are 15-degree nails.

Pros

●  The construction is made of superior 304 stainless steel.

●  Excellent corrosion resistance.

●  Collation of wire welds.

●  Holding power is moderate.

Cons

●  The edges aren’t as sharp

Metabo HPT Siding Nails | 2-1/2 In. x 0.092 In. | Collated Wire Coil | Full Round-Head | Ring Shank | Hot-Dipped Galvanized | 3600 Count | 13369HPT

Metabo HPT Siding Nails
Source: Amazon.com

Metabo HPT 13369HPT siding nails are Hardie siding-specific fasteners. These nails are the right size for fiber cement thicknesses ranging from 4.5 to 18mm. Aside from that, they have a superior Hot Dipped Galvanized finish. It’s a zinc-coated layer on the surfaces. This finish provides exceptional rust and corrosion resistance, a must-have feature for siding.

These have ring shanks for added strength. When it comes to siding, they function better than smooth shank nails. Furthermore, their full round heads will provide more sheet holding strength and a wider hitting surface.

Additionally, a superior wire weld collation allows utilizing them with nail guns appear to be as simple as it gets. In comparison to plastic strips, this collation also keeps up better in long-term storage. As a result, you get a lot of bang for your buck with this nail set. Despite this, there are certain disadvantages to Metabo HPT 13369HPT. For example, they have limited interoperability with other brands’ nail guns. You’ll have a hard time finding something compatible if you don’t have a Metabo HPT NV65AH2.

Pros

●  Hot-dipped galvanized for superior rust resistance.

●  Collation of wire welds.

●  They are holding power as the best in class.

●  With full-round heads, the surface is more striking.

●  The sizing is perfect.

Cons

●  Many nail guns are incompatible with it.

Grip-Rite Prime Guard MAXC62821 15-Degree Wire Coil 2-Inch by .090-Inch Ring Shank 316 Stainless Steel Siding Nails, 1,800 Per Box

Grip-Rite Prime Guard MAXC62821 15-Degree Wire Coil 2-Inch by .090-Inch Ring Shank 316 Stainless Steel Siding Nails, 1,800 Per Box
Source: Amazon.com

Prime Guard MAXC62820 from Grip-Rite outperforms the other three in gripping power. Rings with a diameter of 0.09 inches make up nearly the whole shanks of these nails. As a result, they have an unrivaled grasp. Similarly, these nails compete with the best when it comes to durability. The credit belongs to a 304 stainless steel construction that allows them to tolerate extreme humidity. As a result, your siding job will be less vulnerable to damage.

This set’s adaptability makes it stand out, as it works with most 15-degree siding nailers. You won’t have any problems installing your Bostitch, Makita, Hitachi, Senco, or Porter-Cable. This set of nails, though, is a cut above the rest.

The wire weld collation on these nails is a little flimsy right now. During use, the wire utilized here bends, resulting in mismatched pins. It can also cause the nailer to jam on occasion. The Prime Guard MAXC62820 could have been the best nail set to buy if it hadn’t been for this.

Pros

●  Unrivaled gripping strength.

●  Construction is made of stainless steel, which ensures long-term endurance.

●  Nail guns are widely compatible with this product.

●  The heads are flat and circular.

Cons

●  Collation of frail wires.

Can I Use Hardie Siding with Bright Finish Nails?

Fasteners with a brilliant finish should be avoided at all costs. Either galvanized or stainless steel should be used as the material of choice. And when we say galvanized, we’re not talking about electro galvanized, which can lead to premature corrosion. Instead, opt for Hot Dipped Galvanized nails.

How Far Should the Nails be Driven?

Drive the nails through the sheathing and into the studs to a depth of about 1 inch.

Is a Pneumatic Nailer Required for Hardie Siding?

 It’s not that you couldn’t get by without a pneumatic nailer, but it can save you some time and effort. If you have leisure time and a limited budget, hammering is an option.

Final Thoughts

Unless you know where to look, finding the best nails for Hardie siding might be difficult. We’d be delighted to assist in removing that annoyance. If you haven’t already decided, we propose that any of the nail types highlighted in this article are all good choices if you can overlook the minor cons.

Leave a Reply

Your email address will not be published. Required fields are marked *

Create. Update. Renovate.

Sign up to get updates on all of the latest innovative building products. 

We will only send you awesome stuff!
Privacy Policy

Get Latest Updates on Innovative Building Materials

Discover by Category