The biggest challenge for electricians during winter is the cold. Working with high-voltage equipment puts your life in jeopardy. But when you’re also working in cold temps, the dangers multiply.
As an electrician, you should choose the best winter work gloves. Read on as this article will tackle the best electrician work gloves fit for winter.
How to Select Good Winter Work Gloves for Electricians?
Choosing the correct electrical-insulating gloves can protect against electrical currents. Check out these five crucial factors to avoid electric shocks:
The Occupational Safety and Health Administration has set out the regulations defining electrical protection equipment in 29 CFR 1910.137. Electrical working gloves are classified according to the level of voltage protection. They’re also categorized by whether or not they are ozone resistant.
The right glove should have insulation and a lengthened cuff to prevent heat from escaping. Velcro straps and wrist bungee closures improve insulation.
But keep in mind that while a large glove sized to fit over a liner will provide greater warmth, it will compromise dexterity. Bulkier, better-insulated gloves necessitate more gripping power to grasp a tool, which can tire you out faster.
Handling wires and other electrical equipment requires meticulous hands and gloves. Any safety professional understands using high-dexterity gloves improves safety and job effectiveness. You want a glove that will safeguard your hands while efficiently accomplishing your tasks.
An electrician’s work gloves are usually made of rubber. Natural or synthetic rubber dries faster than those made of leather. Leather, on the other hand, is more resistant to wear.
You can get leather gloves made out of goatskin, buckskin, cowhide, and synthetic. Goatskin leather is more supple than cattle leather, and top-grain leather has a little more texture for a better grip.
You also need to check the durability of the gloves. Heavy leather gloves have a higher wear resistance and a moderate cut resistance. Synthetic gloves designed specifically for cut resistance may have an ANSI cut-resistance rating ranging from A3 (lowest) to A5 (highest).
Because they are made of slippery materials, they frequently have a rubber-like coating for an increased grip.
7 Best Winter Work Gloves for Electricians
The Lineman work gloves are 85% leather, 5% neoprene, 5% nylon, and 5% spandex. These gloves’ soft grain leather construction ensures great comfort and long-lasting durability. Its cuffs also have side vents to keep your hands cool, comfortable, and free of excessive sweating. Finally, these industrial gloves have double-row padded knuckles for additional durability.
- Has two rows of padded knuckles
- Side vents for less sweat
- Comfortable neoprene cuffs
- Not great on live circuits
- Some customers have complained that they don’t last long
The Magid safety electrical gloves are made from natural rubber latex, making them incredibly flexible and fit perfectly. Its design makes it ideal for dealing with tiny wires and other jobs that demand high dexterity.
Despite their thin latex build, these gloves can resist up to 1000v AC/500v DC. The gloves’ snug-fitting rubber cuffs keep your hands completely insulated in chilly weather or winter months.
- Super thin design
- Withstand 1000v AC/500v DC
- Natural latex
- Very high dexterity
- Some say the material used caused moderate chemical burns
Carhartt Winter Dex II is a highly insulated glove with a waterproof design and adjustable wrist cuff fit for wintertime. The company has used FastDry technology to wick away sweat in the gloves’ linings quickly. These gloves also have a Storm Defender insert, which promotes breathability and ensures that they are entirely waterproof and windproof.
The softshell of these gloves are made of neoprene with a strong nylon trim for enhanced comfort. Its fingers and thumb holes are reinforced with padded foam. Finally, the tightened elastic construction of these gloves’ wrists features a hook and loop cuff fastening mechanism.
- Has FastDry technology
- Neoprene shell
- Very soft insulation
- Waterproof and windproof
- Storm Defender insert
- Not suitable for live circuits
The Ansell ActivArmr gloves are created specifically for electricians who commonly suffer hand injuries on the job. These gloves are built with a polyurethane palm and fingertip coating. The coating is more resistant to wear and tear than leather.
It’s made of Dyneema fiber, sometimes known as ultra-high molecular weight polyethylene (UHMWPE), which offers superior cut and abrasion resistance. The gloves include an adjustable wrist fastening that gives superb insulation throughout the cold winter months.
A varied stitch design also provides the breathability you need to minimize extra perspiration. Also, these gloves have been tested and certified to ANSI and ISEA requirements.
- ANSI and ISEA certifications
- Made from Dyneema fiber
- Polyurethane coating
- Not fit for live circuits
- Can get easily dirty
If you’re an electrician who works with high voltages, the Salisbury Hybrid electric safety gloves will be the right fit. The pair can protect up to 1,000 volts AC due to its rubber insulation and outer leather lining.
It is strongly advised that the gloves should be re-tested to guard against electrical currents every six months. The inspection is per the most recent versions of the ASTM Standard F496. These gloves aren’t the most breathable, but if you’re concerned about your safety, the safety aspect makes up for it.
- Can protect up to 1,000 AC
- Rubber insulation
- Some gloves are expired when shipped
These insulated rubber gloves are an excellent choice for the electrician who needs protection from the elements without sacrificing hand dexterity. ESA Supplies rubber electrical protective gloves that guard against electrical currents of less than 1,000 volts. They are made of exceptionally durable rubber, giving them long-lasting power.
Another apparent advantage of these gloves is their economic cost. It’s also thick enough to stand up to and survive electric shocks. As a result, it is sufficiently protective when used by electricians exposed to various electricity-related hazards.
- Priced lower than others
- Can withstand 1,000 AC
- Not fit for jobs handling above 1,000 AC
The CLC Leathercraft gloves include strengthened fingertips to prevent them from wearing away from regular use. Three of the fingertips include touch-compatible pads, allowing you to utilize your smart devices while wearing these gloves. The gloves’ back is made from spandex, which allows them to be flexible while fitting a range of hand sizes.
- Durable padded palms
- Three fingertips are touch-compatible
- Spandex back
- Less grip
As an electrician, you must prioritize your safety above all else. It is a must to safeguard your hands from all risks and dangers associated with electrical work. You may get that kind of protection by using the best winter work gloves for electricians.